Search Results

Standard

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

2005-10-18

HISTORICAL

J1288_200510

This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.

Standard

Packaging, Storage, and Shelf Life cf Hydraulic Brake Hose Assemblies

1999-04-01

HISTORICAL

J1288_199904

This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.

Standard

PACKAGING, STORAGE, AND SHELF LIFE OF HYDRAULIC BRAKE HOSE ASSEMBLIES

1985-06-01

HISTORICAL

J1288_198506

This report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The report embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this report. This report describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE Standard J1401.

Standard

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

2012-07-05

CURRENT

J1288_201207

This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.

Standard

RUBBER SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS

1995-01-10

HISTORICAL

J1603_199501

This SAE Standard describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston.

Standard

POWER STEERING PRESSURE HOSE — HIGH VOLUMETRIC EXPANSION TYPE

1970-08-01

HISTORICAL

J188_197008

This specification covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of –40 to +121 C (–40 to +250 F) average, + 149 C (+ 300 F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required. Type 1 hose shall be suitable for 1500 psi maximum working pressure. Type 2 hose shall be suitable for 1300 psi maximum working pressure.

Standard

Application of Hydraulic Brake Hose to Motor Vehicles—Wheel End and Axle

2007-10-04

HISTORICAL

J1406_200710

This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles.

Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

2017-07-27

WIP

J1406

This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.

Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

2012-07-05

CURRENT

J1406_201207

This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles.

Standard

APPLICATION OF HYDRAULIC BRAKE HOSE TO MOTOR VEHICLES

1981-03-01

HISTORICAL

J1406_198103

This recommended practice covers the application of hydraulic brake hose (as defined by SAE J1401 FEB79, Road Vehicle–Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids) as used to provide a flexible hydraulic connection between brake system components on motor vehicles.

Standard

APPLICATION OF HYDRAULIC BRAKE HOSE TO MOTOR VEHICLES

1989-05-01

HISTORICAL

J1406_198905

This recommended practice covers the application of hydraulic brake hose (as defined by SAE J1401 JUN85, Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Nonpetroleum Base Hydraulic Fluids) as used to provide a flexible hydraulic connection between the brake system components on motor vehicles.

Standard

Application of Hydraulic Brake Hose to Motor Vehicles

2002-04-09

HISTORICAL

J1406_200204

This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between brake system components on motor vehicles.

Standard

Automotive Hydraulic Brake System—Metric Tube Connections

2002-10-31

HISTORICAL

J1290_200210

This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

AUTOMOTIVE HYDRAULIC BRAKE SYSTEM—METRIC TUBE CONNECTIONS

1980-07-01

HISTORICAL

J1290_198007

This recommended practice documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038-1977 (E). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

Automotive Hydraulic Brake System - Metric Tube Connections

2012-07-05

CURRENT

J1290_201207

This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

RUBBER DUST BOOTS FOR THE HYDRAULIC DISK BRAKE PISTON

1991-09-30

HISTORICAL

J1570_199109

This SAE Standard covers molded rubber boots used on disc brake pistons to prevent the entrance of dirt and moisture which could cause corrosion and otherwise impair caliper operation. The specification includes performance tests of brake piston boots of both plain and insert types under specified conditions and does not include requirements relating to chemical composition or physical properties of the rubber compound. Further, it does not cover the strength of the adhesion of rubber to the insert material where an insert is used. The rubber material used in these boots is classified as suitable for operating in a temperature range of −40 to + 120 °C ± 2 °C (−40 to + 248 °F ± 3.6 °F).

Standard

POWER STEERING RETURN HOSE – LOW PRESSURE

1970-08-01

HISTORICAL

J189_197008

This specification covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings or user applied clamps for use in automotive power steering applications as flexible connections within the temperature range of –40 C ( – 40 F) to +121 C ( + 250 F) average, 149 C (300 F) maximum peaks. Hose assemblies shall be suitable for 250 psi maximum working pressure with end fittings and 100 psi maximum working pressure with user applied clamps.

Standard

ROAD VEHICLE–HYDRAULIC BRAKE HOSE ASSEMBLIES FOR USE WITH NONPETROLEUM-BASE HYDRAULIC FLUIDS

1994-06-01

HISTORICAL

J1401_199406

This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer. This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703 and SAE J1705. The nominal internal diameter of the brake hose shall be one of the following values: a 3.2 mm (1/8 in) or, b 4.8 mm (3/16 in)

Standard

Road Vehicle—Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids

1999-09-09

HISTORICAL

J1401_199909

This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer. This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703 and SAE J1705. The nominal internal diameter of the brake hose shall fall within one of the following values: a 3.5 mm or less (1/8 in or less) b 4 to 5 mm (3/16 in)

Standard

Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids

2013-02-05

CURRENT

J1401_201302

This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer. This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703, SAE J1704 and SAE J1705. The nominal internal diameter of the brake hose shall fall within one of the following values: a less than 4 mm (1/8 in or less) b 4 to 5 mm (3/16 in)